Clutch Pilot Bearing Replacement

Clutch Pilot Bearing Replacement

Tools Required
* J 23907 (09917-58010) Input Shaft Bearing Remover
* J 35271 (09924-17810) Flywheel Holder
* 09925-98210 Input Shaft Bearing Installer


Removal Procedure




1. Remove the transaxle from the vehicle. Refer to Transmission Replacement (D16 - Manual Transaxle) for the D16 transaxle or Transmission Replacement (Y4M - Manual Transaxle) for the Y4M transaxle.
2. Install the J 35271 (2) to the flywheel.
3. Remove the pressure plate and the clutch disc. Refer to Clutch, Pressure Plate, and Pilot Bearing Replacement (Service and Repair).





Caution: Wear safety glasses in order to avoid eye damage.

4. Remove the transmission input shaft bearing from the crankshaft using the J 23907 (1).


Installation Procedure




1. Install the input shaft bearing using the 09925-98210 (2) and J 35271 (1).
2. Install the pressure plate. and the clutch disc. Refer to Clutch, Pressure Plate, and Pilot Bearing Replacement (Service and Repair).
3. Remove the J 35271 (1) from the flywheel.
4. Install the transaxle to the vehicle. Refer to Transmission Replacement (D16 - Manual Transaxle) for the D16 transaxle or Transmission Replacement (Y4M - Manual Transaxle) for the Y4M transaxle.