Symptoms - Fixed and Moveable Windows

Symptoms - Fixed and Moveable Windows

Important: The following steps must be completed before using the symptom tables.


1. Perform the Diagnostic System Check - Vehicle (Initial Inspection and Diagnostic Overview) before using the Symptom Tables in order to verify that all of the following are true:

* There are no DTCs set.
* The control modules can communicate via the serial data link.

2. Review the system operation in order to familiarize yourself with the system functions. Refer to the following system descriptions:

* Power Windows Description and Operation (Power Windows Description and Operation)
* Stationary Window Description (Stationary Window Description)



Visual/Physical Inspection

* Inspect for aftermarket devices which could affect the operation of the system.
* Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.


Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections (Component Tests and General Diagnostics).

Symptom List

Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

* Defogger Grid Lines Diagnosis (Defogger Grid Lines Diagnosis)
* Power Windows Inoperative - One or Both Front Windows (Power Windows Inoperative - One or Both Front Windows)
* Power Windows Inoperative - One or Both Rear Windows (Power Windows Inoperative - One or Both Rear Windows)