Cylinder Head Assembly
Cylinder HeadSurface Flatness - Block Deck - Transverse 0.030 mm (0.0012 in)
Surface Flatness - Block Deck - Longitude 0.050 mm (0.002 in)
Surface Flatness - Block Deck - Overall 0.1 mm (0.004 in)
Camshaft Cap Bolt 10 N.m (89 lb in)
Tighten the camshaft bearing cap bolts in increments of 3 turns until they are seated, lubricate.
Intake Camshaft Rear Cap Bolt 25 N.m (18 lb ft)
Camshaft Sprocket Bolt
First Pass 85 N.m (63 lb ft)
Final Pass 30 degrees
Cylinder Head Bolt Re-Usability
Install NEW cylinder head bolts.
Cylinder Head Bolt
First Pass 30 N.m (22 lb ft)
Final Pass 155 degrees
Exhaust Manifold to Cylinder Head Nut 14 N.m (124 lb in)
Exhaust Manifold to Cylinder Head Stud - 2 passes 10 N.m (89 lb in)
Intake Manifold to Cylinder Head Bolt 10 N.m (89 lb in)
Intake Manifold to Cylinder Head Nut 10 N.m (89 lb in)
Intake Manifold to Cylinder Head Stud 6 N.m (53 lb in)