Windshield Side Garnish Molding Replacement
Windshield Side Garnish Molding Replacement
Removal Procedure
1. Remove the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (Service and Repair) .
2. Grasp the windshield side garnish molding.
3. Pull the molding away from the windshield frame.
4. Disconnect the electrical connector.
Installation Procedure
1. Connect the electrical connector.
2. Position the windshield side garnish molding to the windshield frame.
3. Push the molding inward snapping the retainers into the windshield frame.
4. Install the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (Service and Repair) .