Front Seat Adjuster Replacement

Front Seat Adjuster Replacement

Removal Procedure





1. Remove the seat. Refer to Seat Replacement (Seat Replacement) .
2. Remove the seat belt pretensioner and buckle. Refer to Seat Belt Buckle Pretensioner Replacement (Removal and Replacement) .
3. Remove the seat cushion cover and foam. Refer to Front Seat Cushion Cover and Pad Replacement (Front Seat Cushion Cover and Pad Replacement) .




4. For non-power seats, remove the adjuster adjustment bar.




5. Reposition the lumbar pump, if equipped.
6. Remove the tie straps and reposition the pump and pouch up through the seat support wires .
7. Remove the seat belt harness from the left seat frame.
8. Remove the memory seat control module, if equipped.




9. Remove the fasteners mounting the seat to the adjuster.
10. Remove the adjuster.
11. Transfer the parts as necessary.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the adjuster to the seat. Tighten the fasteners to the seat.

Tighten the adjuster fasteners to 24 N.m (18 lb ft).





2. For non-power seats, align the adjusters with their locking pawls engaged in the same slots side to side.
3. Install the seat adjuster adjustment bar.




4. Install the lumbar pump, if equipped.
Important: When working on the passenger seat the convoluted tubing for the lumbar pump must lay over the aluminum bracket and be zip tied in place.



5. Connect the seat belt harness to the left seat.




6. Install the memory seat control module to the seat spring wire, if equipped.




7. Install the seat belt pretensioner and buckle. Refer to Seat Belt Buckle Pretensioner Replacement (Removal and Replacement) .
8. Install the seat cushion foam and cover. Refer to Front Seat Cushion Cover and Pad Replacement (Front Seat Cushion Cover and Pad Replacement) .
9. Install the seat. Refer to Seat Replacement (Seat Replacement) .