Exhaust Tail Pipe Flow Control Vacuum Check Valve and Hose Replacement

Exhaust Tail Pipe Flow Control Vacuum Check Valve and Hose Replacement

Removal Procedure





1. Disconnect the quick connect fitting (1) at the front of dash. Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service) .
2. Remove the intake manifold. Refer to Intake Manifold Replacement (Service and Repair) .
3. Remove the exhaust flow control vacuum check valve (2) and engine compartment vacuum line from the vehicle.



Installation Procedure





1. Install the exhaust flow control vacuum check valve (2) and engine compartment vacuum line to the vehicle.
2. Install the intake manifold. Refer to Intake Manifold Replacement (Service and Repair) .
3. Connect the quick connect fitting (1) at the front of dash. Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service) .