Daytime Running Lamp: Service and Repair

Daytime Running Lamp (DRL) Ambient Light Sensor Replacement

Removal Procedure





1. Remove the instrument panel defroster grill. Refer to Defroster Grille Replacement (Service and Repair) .
2. Twist to release the daytime running lamps (DRL) sensor from the I/P defroster grill.



Installation Procedure





1. Twist to secure the DRL sensor to the I/P defroster grill.
2. Connect the electrical connector to the DRL sensor.
3. Install the instrument panel defroster grill. Refer to Defroster Grille Replacement (Service and Repair) .