Generator Replacement

Generator Replacement

Removal Procedure

1. Remove the drive belt. Refer to Drive Belt Replacement - Accessory (Drive Belt Replacement - Accessory) .
Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution) .
2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (6.0L) (Service and Repair)Battery Negative Cable Disconnection and Connection (7.0L) (Service and Repair) .




3. Disconnect the generator electrical connector (1 and 2).
4. Remove the battery feed terminal nut (3) from the generator.
5. Remove the battery feed cable.




6. Remove the generator mounting bolts.
7. Remove the generator.



Installation Procedure

1. Position the generator on the mounting bracket.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the generator bolts.

Tighten the generator bolts to 50 N.m (37 lb ft).





3. Connect the generator electrical connector (1 and 2).
4. Install the battery feed cable.
5. Install the battery feed terminal nut (3).

Tighten the battery feed cable nut to 13 N.m (10 lb ft).

6. Install the drive belt. Refer to Drive Belt Replacement - Accessory (Drive Belt Replacement - Accessory) .
7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (6.0L) (Service and Repair)Battery Negative Cable Disconnection and Connection (7.0L) (Service and Repair) .