Transmission Fluid Level Inspection

Transmission Fluid Level Inspection





1. Raise and suitably support the vehicle; ensure that the vehicle is level. Refer to Lifting and Jacking the Vehicle (Service Intervals) .
2. Clean any dirt from around the fill plug hole.
3. Remove the transmission fluid fill plug.
4. Inspect the transmission fluid level. Ensure that the fluid level is even with the bottom of the fill plug hole.
5. Add transmission fluid, if necessary. Refer to Transmission Fluid Replacement (Transmission Fluid Replacement) .





Notice: Refer to Fastener Notice (Fastener Notice) .

6. Install the transmission fluid fill plug hole.

Tighten the transmission fluid fill plug hole to 27 N.m (20 lb ft).

7. Lower the vehicle.