Cruise Control Indicator Malfunction (IPC Indicator Malfunction)

Cruise Control Indicator Malfunction (IPC Indicator Malfunction)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview
* Review Strategy Based Diagnosis for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions provides an overview of each diagnostic category.

Circuit/System Description

The instrument panel cluster (IPC) illuminates the cruise control engaged indicator based on serial data messages received from the engine control module (ECM) or the powertrain control module (PCM). The indicator is commanded ON when the cruise control system is controlling vehicle speed, and turned OFF with the system disengaged.

Diagnostic Aids

* This diagnostic assumes the cruise control system is functioning normally and there are no DTCs set. If the cruise control system is malfunctioning, refer to Cruise Control Malfunction. Cruise Control Malfunction
* If any DTCs are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle. Diagnostic Trouble Code Descriptions

Circuit/System Verification

1. Ignition ON, perform the scan tool IPC Display Test. Verify the cruise control indicator illuminates.

• If the indicator does not illuminate, replace the IPC.

2. Replace the ECM/PCM.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests