Air Cleaner Fresh Air Duct/Hose: Service and Repair

Air Cleaner Outlet Duct Replacement

Removal Procedure




1. Remove the intake manifold cover.
2. Disconnect the positive crankcase ventilation (PCV) tube from the air inlet duct.
3. Loosen the air cleaner outlet duct clamp at the throttle body.
4. Remove the air cleaner outlet duct from the throttle body.
5. Loosen the air cleaner outlet duct clamp at the mass air flow (MAF)/intake air temperature (IAT) sensor.
6. Remove the air cleaner outlet duct from the MAF/IAT sensor.

Installation Procedure




1. Install the air cleaner outlet duct from the MAF/IAT sensor.

Notice: Refer to Fastener Notice.

2. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.

Tighten the clamp to 3 N.m (27 lb in).

3. Install the air cleaner outlet duct to the throttle body.
4. Tighten the air cleaner outlet duct clamp at the throttle body.

Tighten the clamp to 3 N.m (27 lb in).

5. Connect the PCV tube to the air inlet duct.
6. Install the intake manifold cover.