Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure





1. Remove the oil pressure sensor heat shield nut and shield.




2. Disconnect the engine oil pressure sensor electrical connector (1).




3. Remove the engine oil pressure sensor.



Installation Procedure






Notice: Refer to Fastener Notice .

1. Install the engine oil pressure sensor.

Tighten the sensor to 16 N.m (12 lb ft).





2. Connect the engine oil pressure sensor electrical connector (1).




3. Install the oil pressure sensor heat shield and nut.

Tighten the nut to 10 N.m (89 lb in).