Steering Wheel Theft Deterrent Lock Replacement

Steering Wheel Theft Deterrent Lock Replacement

Removal Procedure





Caution: Refer to SIR Caution .
1. Disable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling .
2. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement (Steering Column Trim Covers Replacement) .
3. Remove the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
4. Disconnect the connector from the theft deterrent control module.
5. If necessary, disconnect the connector from the ignition lock cylinder case (1).
6. Remove the theft deterrent control module (2) from ignition lock cylinder case assembly (1).



Installation Procedure





1. Install the theft deterrent control module (2) onto the ignition lock cylinder case assembly (1).
Caution: Refer to SIR Inflator Module Coil Caution .
2. Connect the connector to the theft deterrent control module.
3. If necessary, connect the connector to the ignition lock cylinder case.
4. Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
5. Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement (Steering Column Trim Covers Replacement) .
6. Enable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling .