Emergency Vehicle Headlamp Flasher Replacement

Emergency Vehicle Headlamp Flasher Replacement

Removal Procedure




1. Remove the upper radiator baffle.
2. Disconnect the electrical connectors.
3. Remove the headlamp flasher bolts at the front radiator support (2).




4. Remove the headlamp flasher.

Installation Procedure




1. Position the headlamp flasher (1) to the front radiator support (2).

Notice: Refer to Fastener Notice.

2. Install the headlamp flasher bolts.

Tighten the bolts to 10 N.m (89 lb in).

3. Connect the electrical connectors.
4. Install the upper radiator baffle.