Air Cleaner Inlet Duct Replacement (1st Design)

Air Cleaner Inlet Duct Replacement (1st Design)

Removal Procedure




1. Remove the right tire and wheel.
2. Remove the front wheelhouse panel splash shield.
3. Remove the air cleaner inlet duct bolt (1) and push pin retainer (3).
4. Remove the air cleaner inlet duct (2).

Installation Procedure




1. Position the air cleaner inlet duct (2) to the side rail.

Notice: Refer to Fastener Notice.

2. Install the air cleaner inlet duct bolt (1) and push pin retainer (3).

Tighten the bolt to 10 N.m (89 lb in).

3. Install the front wheelhouse panel splash shield.
4. Install the right tire and wheel.