Rear Seat Back Replacement

Rear Seat Back Replacement

Removal Procedure




1. Remove the rear seat cushion.




2. Release the clip that retains the seat back side cushion cover and pad to the seat back frame from the rear of the seat by squeezing the clip together using needle nose pliers or similar tool and pulling out to remove.
3. Remove the rear seat back side cushion cover and pads by pulling outward on the top and then upward.




4. Remove the rear seat back bolts.
5. Remove the rear seat backs from the rear seat back frame.

Installation Procedure




1. Install the rear seat backs to the rear seat back frame.

Notice: Refer to Fastener Notice.

2. Install the rear seat back to seat back frame bolts.

Tighten the fasteners to 35 N.m (26 lb ft).




3. Install the rear seat back side cushion covers and pads to the seat back frame.
4. Install the rear seat cushion.