Front Fog Lamp Replacement (Notchback)

Front Fog Lamp Replacement (Notchback)

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).
1. Disconnect the negative battery cable.
2. Remove the nuts and the engine under cover.




3. Remove the bolts and the resonator.




4. Remove the nuts securing the fog lamp assembly.
5. Remove the fog lamp assembly.
6. Disconnect the electrical connector.
7. Remove the bulb.

Installation Procedure




1. Install the bulb.
2. Connect the electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the fog lamp with the screws and tighten to 5 Nm (44 lb in).




4. Install the resonator with the bolts.




5. Install the engine under cover with the bolts.
6. Connect the negative battery cable.