Tail Lamp Replacement (Hatchback)

Tail Lamp Replacement (Hatchback)

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).
1. Disconnect the negative battery cable.
2. Remove the tail lamp assembly screws (1).
3. Slide the tail lamp assembly toward the hatch opening and remove it.
4. Remove the bulbs.

Installation Procedure




1. Install the bulbs.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the tail lamp assembly with the screws (1) and tighten to 3 Nm (27 lb in).
3. Connect the negative battery cable.