Stall Speed Test

Stall Speed Test

The purpose of the stall test is to inspect the overall performance of the automatic transmission (A/T) and the engine by measuring the stall speed in drive (D) and reverse (R) range.

1. Wedge the 4 wheels and apply the parking brake fully. Lock the vehicle in place.
2. Fully press on the brake pedal with left foot.

Important: Do not continuously run longer than 5 seconds. Extreme increasing of oil temperature may occur.

3. Shift into drive (D) and reverse (R) range, fully press on accelerator pedal with right foot.

The standard stall speed is 2240-2540 RPM.

Make sure to keep interval for more than 1 minute between stall tests.