Clutch Cable: Service and Repair

Clutch Cable Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).
1. Disconnect the negative battery cable.
2. Remove the clutch control cable adjusting nut (1).
3. Remove the clutch control cable from the mounting bracket (2).




4. Disconnect the clutch control cable from the clutch pedal.
5. Remove the battery.




6. Remove the clutch control cable to cowl mounting nuts.
7. Remove the clutch control cable.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the clutch control cable to cowl and install the clutch control cable mounting nuts and tighten to 13 Nm (115 lb in).




2. Install the battery.
3. Connect the clutch control cable to the clutch pedal.




4. Install the clutch control cable to the mounting bracket (2).
5. Install the clutch control cable-adjusting nut (1).
6. Adjust the clutch control cable.