4. Clutch Pilot Bearing Removal

Clutch Pilot Bearing Removal

Special Tools
* J 2619-01 - Slide Hammer
* J 23907 - Slide Hammer with Bearing Adapter

For equivalent regional tools, refer to Special Tools (6.2L LS3) (Special Tools)Special Tools (6.2L LS9) (Special Tools)Special Tools (7.0L) (Special Tools).




1. Remove the clutch pilot bearing using the J 23907 - slide
hammer with bearing adapter (1) and J 2619-01 - slide hammer (2).

1. Install the legs of the J 23907 - slide hammer with bearing adapter (1) into the clutch pilot bearing.
2. Rotate the shaft of the tool until the legs of the tool are snug and contacting the I.D. surface of the bearing.
3. Install the J 2619-01 - slide hammer (2) to the J 23907 - slide hammer with bearing adapter (1).
4. Remove the bearing from the rear of the crankshaft.
5. Remove the J 23907 - slide hammer with bearing adapter (1) and J 2619-01 - slide hammer (2) from the bearing.




2. Discard the bearing.