Crankshaft, Engine

CRANKSHAFT JOURNAL DIAMETER & LIMIT

Crankshaft Main Journal Diameter
Production 64.992-65.008 mm2.558-2.559 in)
Service 64.992 mm2.558 in)

Crankshaft Main Journal Out-of-Round
Production 0.003 mm (0.000118 in)
Service 0.008 mm0.0003 in)

Crankshaft Main Journal Taper
Production 0.01 mm (0.0004 in)
Service 0.02 mm (0.00078 in)

Connecting Rod Side Clearance 0.11-0.51 mm (0.00433-0.02 in)

Connecting Rod Journal Out-of-Round
Production 0.005 mm (0.0002 in)
Service 0.01 mm (0.0004 in)

Connecting Rod Journal Diameter
Production 53.318-53.338 mm (2.0991-2.0999 in)
Service 53.308 mm (2.0987 in)

Connecting Rod Journal Taper - Maximum for 1/2 of Journal Length
Production 0.005 mm (0.0002 in)
Service 0.02 mm (0.00078 in)

Connecting Rod Bearing Clearance
Production 0.023-0.065 mm (0.0009-0.0025 in)
Service 0.023-0.076 mm (0.0009-0.003 in)