Brake Rotor/Disc

FRONT BRAKE

Minimum Allowable Thickness After Refinish 23.0 mm (0.906 in)
Discard Thickness* 22.8 mm (0.898 in)
Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Maximum Allowable Assembled Lateral Runout 0.05 mm (0.002 in)

REAR BRAKE

Minimum Allowable Thickness After Refinish 12.0 mm (0.472 in)
Discard Thickness* 11.8 mm (0.465 in)
Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Maximum Allowable Assembled Lateral Runout 0.05 mm (0.002 in)

* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.