Floor Shift Control Knob Replacement

Floor Shift Control Knob Replacement

Removal Procedure




1. Release the boot (2) from the shift control knob (1) by pulling the boot retainer downward.
2. Remove the shift knob retaining screw (3).
3. Remove the shift knob (1) from the shift control.

Installation Procedure




1. Install the shift knob (1) from the shift control.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the shift knob retaining screw (3) and tighten to 4 Nm (35 lb in).
3. Install the boot (2) to the console.