Cylinder Head Assembly
CYLINDER HEADCylinder Head Bolt - M8
First Pass 15 Nm (11 lb ft)
Final Pass 75 Degrees
Cylinder Head Bolt - M11
First Pass 30 Nm (22 lb ft)
Final Pass 150 degrees
CYLINDER HEAD BOLT RE-USABILITY
Notice: Do not use any sealing material. Always use new cylinder head bolts.
INTAKE MANIFOLD
Upper-to-Cylinder Head Bolt - Long 23 Nm (17 lb ft)
Upper-to-Cylinder Head Bolt - Short 23 Nm (17 lb ft)
Upper-to-Lower Intake Manifold Bolt 23 Nm (17 lb ft)
Tuning Valve Bolt 10 Nm (89 lb in)
CAMSHAFT BEARING CAP
Camshaft Cap Bolt 10 Nm (89 lb in)
EXHAUST MANIFOLD
Exhaust Manifold Bolt 20 Nm (15 lb ft)