Sunroof / Moonroof: Service and Repair

Sunroof Module Assembly Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Remove the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair).
3. Remove the drain hoses.
4. Remove the strap.
5. Disconnect the electrical connector.
6. Remove the bolts and the motor.




7. Disconnect the electrical connector.
8. Remove the strap.
9. Remove the motor control module.




10. Remove the bolts and the sunroof housing from the vehicle.




11. Remove the drain channel.
12. Remove the sunshade.

Installation Procedure




1. Install the sunshade.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the sunroof housing and tighten to 7 Nm (62 lb in)..




3. Install the motor control module.
4. Manually position the sunroof glass in the fully closed position.





Note: The sunroof motor assembly must be in the fully closed position before installation.

5. Install the motor and tighten to 5 Nm (44 lb in).
6. Install the drain hoses.
7. Install the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair).
8. Connect the negative battery cable.