9. Exhaust Manifold Installation

Exhaust Manifold Installation




1. Install the exhaust manifold and gasket.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the exhaust manifold retaining nuts and tighten in the sequence shown.

Tighten the exhaust manifold retaining nuts to 25 Nm (18 lb ft).




3. Install the exhaust manifold nuts to the catalytic converter.

Tighten the exhaust manifold nuts to 40 Nm (30 lb ft).




4. Install the heat shield.

Tighten the heat shield bolts to 13 Nm (10 lb ft).

5. Connect the oxygen sensor connector.
6. Connect the negative battery cable.