Without LXV

Engine Control Module Programming and Setup (without LXV)

The following service procedures require either a programming or a setup event performed for a complete repair.

ECM Replacement
Note: It is not necessary to program a new engine control module (ECM). The ECM is programmed from the factory. Ensure the new ECM is equipped with the latest software/calibration.

If the engine control module (ECM) is replaced, the following procedures must be performed:

1. Idle learn procedure--Refer to the appropriate procedure:
- Idle Learn for the 1.6L (LXT) engine (Testing and Inspection)

2. The crankshaft position (CKP) system variation learn procedure-- Refer to the appropriate procedure:
- Crankshaft Position System Variation Learn for the 1.6L (LXT) engine (Testing and Inspection)

3. Theft Deterrent--Refer to Programming Theft Deterrent System Components. (Programming Theft Deterrent System Components). The ECM will learn the incoming fuel continue password immediately upon receipt of a password message. Once a password message is received, and a password is learned, a learn procedure must be performed to change this password again. An ECM which has been previously installed in another vehicle will have learned the other vehicle's fuel continue password, and will require a learn procedure after programming to learn the current vehicle's password.

ECM Reprogramming

If the engine control module (ECM) needs to be reprogrammed, refer to Service Programming System (SPS).

Setup for Component Replacement

The replacement of some components will require a setup procedure for complete repair.

- If any of the following components are replaced, an idle learn procedure must be performed. Refer to the appropriate procedure:
- Idle Learn for the 1.6L (LXT) engine (Testing and Inspection)
- Throttle body assembly
- ECM
- If any of the following components are replaced, a CKP variation learn procedure must be performed. Refer to the appropriate procedure:
- Crankshaft Position System Variation Learn for the 1.6L (LXT) engine (Testing and Inspection)
- CKP sensor
- Engine replacement
- Any engine repair that disturbs the relationship between CKP sensor and the crankshaft reluctor wheel.