Door Window Regulator Replacement (Power Rear)

Door Window Regulator Replacement (Power Rear)

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Remove the rear door glass. Refer to Rear Side Door Window Replacement (Service and Repair).
3. Remove the nuts and the regulator.
4. Disconnect the electrical connector.

Installation Procedure




1. Connect the electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the window regulator with the nuts and tighten to 7 Nm (62 lb in).
3. Install the rear door glass. Refer to Rear Side Door Window Replacement (Service and Repair).
4. Connect the negative battery cable.