Cylinder Head Assembly
Cylinder HeadDO NOT reuse the old cylinder head bolts
Left Sequence:
Right Sequence:
M11 cylinder head bolts (1)
First pass 30 Nm (22 lb ft)
Second pass 150 degrees
M8 cylinder head bolt (2)
First pass 15 Nm (11 lb ft)
Second pass 75 degrees
Camshaft bearing cap
Left (DI):
Right (DI):
Tighten all 10 Nm (89 lb in)
Loosen 1, 2, 3, 4
Retighten 1, 2, 3, 4
Retighten all 10 Nm (89 lb in)
Intake manifold Specifications
Exhaust manifold Specifications
Camshaft sprocket Specifications