2. Crankshaft Balancer Removal

Crankshaft Balancer Removal

Special Tools

* EN-38122-A - Crankshaft Balancer Holder
* EN-43653 - Flywheel Holding Tool

For equivalent regional tools, refer to Special Tools (Special Tools).





Note: EN-43653 - flywheel holding tool may be used instead of EN-38122-A - crankshaft balancer holder to prevent crankshaft rotation.

1. Install EN-38122-A - holder (1).
2. Remove the balancer retaining bolt and washer. Use EN-38122-A - holder and a breaker bar to prevent the crankshaft from rotating when loosening the bolt. Discard the bolt.




3. Remove the crankshaft balancer assembly (1) using a universal removal tool.