69. Oil Pan Cleaning and Inspection

Oil Pan Cleaning and Inspection (6.2L LS3)




1. Remove the oil filter fitting (1), as required.




2. Clean the oil pan in solvent.
Warning: Refer to Safety Glasses Warning (Safety Glasses Warning).

3. Dry the oil pan with compressed air.
4. Inspect the oil pan for the following conditions:

* Damaged gasket surfaces (1)
* Restrictions within the oil passages (2) of the pan
* Damaged oil filter seal surface (3)
* Threaded bolt holes (4) for damage





Caution: Refer to Fastener Caution (Fastener Caution).

5. Install the oil filter fitting (1), as required, and tighten to 55 Nm (40 lb ft).