Daytime Running Lamp: Service and Repair

Daytime Running Lamp (DRL) Ambient Light Sensor Replacement

Removal Procedure




1. Remove the instrument panel defroster grill. Refer to Defroster Grille Replacement (Service and Repair).
2. Twist to release the daytime running lamps (DRL) sensor from the I/P defroster grill.

Installation Procedure




1. Twist to secure the DRL sensor to the I/P defroster grill.
2. Connect the electrical connector to the DRL sensor.
3. Install the instrument panel defroster grill. Refer to Defroster Grille Replacement (Service and Repair).