P164B
DTC P164B or P164C
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (Diagnostic System Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (Strategy Based Diagnosis) for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions (Diagnostic Procedure Instructions) provides an overview of each diagnostic category.
DTC Descriptor
DTC P164B
- Fuel Pump Driver Control Module Read Only Memory (ROM)
DTC P164C
- Fuel Pump Driver Control Module Random Access Memory (RAM)
Circuit/System Description
The control module runs a program to detect an internal fault when power up is commanded.
Conditions for Running the DTC
Ignition ON.
Conditions for Setting the DTC
The FPCM relay has detected an internal malfunction.
Action Taken When the DTC Sets
DTCs P12A7 are Type B DTCs.
Conditions for Clearing the DTC
DTCs P12A7 are Type B DTCs.
Reference Information
Schematic Reference
Engine Controls Schematics (LS3) ([1][2]Electrical Diagrams) Engine Controls Schematics (LS7) ([1][2]Electrical Diagrams) Engine Controls Schematics (LS9) ([1][2]Electrical Diagrams)
Connector End View Reference
Component Connector End Views (Connector Views)
Description and Operation
Fuel System Description (With LS9) (Fuel System Description) Fuel System Description (With LS3 or LS7) (Fuel System Description)
Electrical Information Reference
* Circuit Testing (Circuit Testing)
* Connector Repairs (Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (Testing For Intermittent Conditions and Poor Connections)
* Wiring Repairs (Wiring Repairs)
Scan Tool Reference
Control Module References (Programming and Relearning) for scan tool information
Circuit/System Verification
Verify that DTC P164B or DTC P164C is not set.
If the DTC is set, replace the fuel pump control module relay.
Repair Instructions
Perform the Diagnostic Repair Verification (Verification Tests) after completing the diagnostic procedure.
Fuel Pump Flow Control Module Relay Replacement (Service and Repair)