Torque Converter Cover: Service and Repair

Torque Converter Cover Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting (Service and Repair).




2. Remove the torque converter cover bolts.
3. Remove the torque converter covers.

Installation Procedure





Note: If equipped with 5.3L V8-The tab must be on the engine side of the engine oil pan bolt.

1. Install the torque converter covers.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the torque converter cover bolts.

Tighten the bolts to 10 Nm (89 lb in).

3. Lower the vehicle.