Power Mirror Motor: Service and Repair

Outside Rearview Mirror Motor Replacement

Removal Procedure

1. Remove the mirror face. Refer to Outside Rearview Mirror Glass Replacement (Outside Rearview Mirror Glass Replacement).




2. Remove the mirror motor attaching screws.
3. Remove the mirror motor from the mirror housing disconnect the electrical connector.

Installation Procedure




1. Position the mirror motor to the mirror housing connector the electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the mirror motor attaching screws and tighten to 3 Nm (27 lb in).
3. Install the mirror face. Refer to Outside Rearview Mirror Glass Replacement (Outside Rearview Mirror Glass Replacement).