Power Steering Fluid Reservoir Outlet Hose Replacement

Power Steering Fluid Reservoir Outlet Hose Replacement

Removal Procedure

1. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
2. Place drain pans under the vehicle as needed.




3. Compress the power steering fluid reservoir outlet hose clamp (1) and disconnect the power steering fluid reservoir outlet hose (2) from the remote power steering fluid reservoir (3).
4. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).




5. Compress the power steering fluid reservoir outlet hose clamp (1) and disconnect the power steering fluid reservoir outlet hose (2) from the power steering pump (3).
6. Remove the power steering fluid reservoir outlet hose from the vehicle.

Installation Procedure

1. Position the power steering fluid reservoir outlet hose to the vehicle.




2. Compress the power steering fluid reservoir outlet hose clamp (1) and connect the power steering fluid reservoir outlet hose (2) to the power steering pump (3).
3. Install the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).




4. Compress the power steering fluid reservoir outlet hose clamp (1) and connect the power steering fluid reservoir outlet hose (2) to the remote power steering fluid reservoir (3).
5. Clean any excess power steering fluid from the vehicle and remove the drain pans.
6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (Service and Repair).