Steering Wheel Shroud Replacement

Steering Wheel Shroud Replacement

Removal Procedure

1. Remove steering wheel. refer to Steering Wheel Replacement (Steering Wheel Replacement)




2. Remove the steering wheel switch bezel bolts (2).

Note: Note that the steering wheel switch bezel on the right side may be not contain a switch assembly on some models. Either style will be removed and installed the same way.

3. Unclip the steering wheel switch bezels (1).




4. Release and remove the steering wheel shroud (1).

Installation Procedure




1. Install and secure the steering wheel shroud (1) to the steering wheel.




2. Clip the steering wheel switch bezels (1) in place.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the steering wheel switch bezel bolts (2) and tighten to 2 Nm (18 lb in).
4. Install steering wheel. refer to Steering Wheel Replacement (Steering Wheel Replacement)