Clutch Pilot Bearing Replacement
Clutch Pilot Bearing Replacement
Special Tools
* J 23907 (09917-58010) Input Shaft Bearing Remover
* J 35271 (09924-17810) Flywheel Holder
* 09925-98210 Input Shaft Bearing Installer
Removal Procedure
1. Remove the transaxle from the vehicle. Refer to Transmission Replacement (D16/D20 - Manual Transmission) for the D16 transaxle or Transmission Replacement (Transmission Replacement) for the Y4M transaxle.
2. Install J 35271 (2) to the flywheel.
3. Remove the pressure plate and the clutch disc. Refer to Clutch, Pressure Plate, and Pilot Bearing Replacement (Service and Repair).
Warning
Wear safety glasses in order to avoid eye damage.
4. Remove the transmission input shaft bearing from the crankshaft using J 23907 (1).
Installation Procedure
1. Install the input shaft bearing using 09925-98210 (2) and J 35271 (1).
2. Install the pressure plate and the clutch disc. Refer to Clutch, Pressure Plate, and Pilot Bearing Replacement (Service and Repair).
3. Remove J 35271 (1) from the flywheel.
4. Install the transaxle to the vehicle. Refer to Transmission Replacement (D16/D20 - Manual Transmission) for the D16 transaxle or Transmission Replacement (Transmission Replacement) for the Y4M transaxle.