Bose Module Replacement

Bose Module Replacement

Removal Procedure

1. Fold the passenger side carpet back exposing the electrical center.




2. Remove the 4 amplifier retaining screws from the electrical multi-use bracket.
3. Remove the amplifier from the bracket.
4. Disconnect the electrical leads to the amplifier.

Installation Procedure

1. Position the amplifier to the electrical multi-use bracket and connect the electrical leads to the amplifier.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 4 amplifier retaining screws to the bracket.

Tighten the screws to 2.5 Nm (22 lb in).

3. Install the carpet to cover the instrument panel (I/P) electrical center.