Rear Toe Adjustment

Rear Toe Adjustment

1. Remove the small boot clamp from the boot so as not to allow the boot turn when adjusting the toe.




2. Loosen the rear suspension adjustment link lock nut (1).
3. Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications (Specifications).

Caution: Refer to Fastener Caution (Fastener Caution).

4. Tighten the rear suspension adjustment link lock nut to 70 Nm (52 lb ft).
5. Check the toe setting after tightening.
6. Adjust the toe setting if necessary.
7. Reinstall the small boot clamp.