P0219

DTC P0219

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (Diagnostic System Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (Strategy Based Diagnosis) for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions (Diagnostic Procedure Instructions) provides an overview of each diagnostic category.

DTC Descriptor
DTC P0219 00
- Engine Overspeed

Circuit/System Description

This diagnostic shows the technician when the engine speed was over the calibrated maximum.

Conditions for Running the DTC

* The engine is running.
* The DTC runs continuously once the above condition is met.

Conditions for Setting the DTC

Engine speed was above threshold.

Action Taken When the DTC Sets

DTC P0219 00 is a Type C DTC.

Conditions for Clearing the DTC

DTC P0219 00 is a Type C DTC.

Reference Information
Schematic Reference

Engine Controls Schematics ([1][2]Electrical Diagrams)
Connector End View Reference

Component Connector End Views (Connector End Views By Name)
Electrical Information Reference

* Circuit Testing (Circuit Testing)
* Connector Repairs (Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (Wiring Repairs)

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions (Powertrain Diagnostic Trouble Code (DTC) Type Definitions)
Scan Tool Reference

Control Module References (Programming and Relearning) for scan tool information

Circuit/System Testing

Observe the DTCs with the scan tool.

If DTC P0219 00 is set, inform the customer that these extremely high rotations may cause mechanical damage.

Repair Instructions

Perform the Diagnostic Repair Verification (Verification Tests) after completing the diagnostic procedure.