31. Water Pump Pulley Installation

Water Pump Pulley Installation





Note: Counterhold the crankshaft balancer. The belt has to be installed for this procedure.

1. Install the water pump pulley (2) to the water pump (3).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 3 water pump pulley bolts (1) with locking compound. Refer to Adhesives, Fluids, Lubricants, and Sealers (Adhesives, Fluids, Lubricants, and Sealers).
3. Tighten the 3 water pump pulley bolts (1) to 20 Nm (15 lb ft).