Air Inlet Housing Replacement

Air Inlet Housing Replacement

Removal Procedure

1. Remove heater and air conditioning evaporator and blower module. Refer to Heater and Air Conditioning Evaporator Case Replacement (Service and Repair).




2. Remove air inlet housing (2) from heater and air conditioning evaporator and blower module (1).

* Disconnect electrical connectors.
* Remove 4 air inlet housing bolts (3).

3. Remove air inlet valve actuator. Refer to Air Inlet Valve Actuator Replacement (Air Inlet Valve Actuator Replacement).
4. Remove air inlet valve and inside air valve control cam. Refer to Air Inlet Valve and Inside Air Valve Control Cam Replacement (Left Hand Drive) (Air Inlet Valve and Inside Air Valve Control Cam Replacement (Left Hand Drive)).

Installation Procedure

1. Install air inlet valve and inside air valve control cam. Refer to Air Inlet Valve and Inside Air Valve Control Cam Replacement (Left Hand Drive) (Air Inlet Valve and Inside Air Valve Control Cam Replacement (Left Hand Drive)).
2. Install air inlet valve actuator. Refer to Air Inlet Valve Actuator Replacement (Air Inlet Valve Actuator Replacement).





Caution: Refer to Fastener Caution (Fastener Caution).

3. Install air inlet housing (2) to heater and air conditioning evaporator and blower module (1).

* Connect electrical connectors.
* Install 4 air inlet housing bolts (3) and tighten to 2.5 Nm (22 lb in).

4. Install heater and air conditioning evaporator and blower module. Refer to Heater and Air Conditioning Evaporator Case Replacement (Service and Repair).