Front Wheel Drive Shaft Seal Replacement - Right Side

Front Wheel Drive Shaft Seal Replacement - Right Side (1.8L LUW)

Special Tools
* DT-519 - Installer Drift
* DT-586 - Remover Hook
* DT-7004 - Slide Hammer

For equivalent regional tools, refer to Special Tools (Tools and Equipment).

Removal Procedure

1. Remove right front wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side (Front Wheel Drive Shaft Replacement - Right Side).




2. Remove front wheel drive shaft oil seal (1) using DT-7004 - slide hammer (3) in conjunction with DT-586 - hook (2).

Installation Procedure





Note: Coat seal lips with NEW transmission fluid.

1. Install NEW front wheel drive shaft oil seal (1) using DT-519 - installer drift (2) with hammer.
2. Install right front wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side (Front Wheel Drive Shaft Replacement - Right Side).