101. Engine Coolant Crossover Pipe Installation

Engine Coolant Crossover Pipe Installation




1. Install the coolant crossover pipe gaskets and the coolant crossover pipe assembly onto the engine.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the engine lift bracket (1) and the front coolant crossover pipe bolts (4), and tighten to 50 Nm (37 lb ft).
3. Install the side coolant crossover pipe bolt (2) and tighten to 10 Nm (89 lb in).
4. Install the thermal bypass hose (3) and securely fasten the hose clamp.




5. Install the idler pulleys and bolts.

* Tighten the bolts (1) to 50 Nm (37 lb ft).
* Tighten the bolt (2) to 30 Nm (22 lb ft).