78. Engine Front Cover Installation

Engine Front Cover Installation




1. Install the front cover and the front cover gasket.

Caution: Refer to Fastener Caution (Fastener Caution).

Note: Apply sealer to the shaded bolts (1) in the graphic. Refer to Adhesives, Fluids, Lubricants, and Sealers (Adhesives, Fluids, Lubricants, and Sealers) for recommended sealant. Failure to do so may result in engine coolant leakage from the bolt holes passing through the water jacket.

2. Install the front cover bolts and tighten to 25 Nm (18 lb ft).