Emergency Vehicle Rear Compartment Lid Lamp Replacement (RPO T53)

Emergency Vehicle Rear Compartment Lid Lamp Replacement (Impala RPO T53)

Removal Procedure




1. Open the rear compartment.
2. Disconnect the electrical connectors from the rear compartment lid lamp(s).
3. Disconnect the electrical connector from the flasher fuse (1).
4. Remove the flasher fuse (1) if required.




5. Remove the rear compartment lid lamp(s) from the rear compartment lid.

Installation Procedure




1. Position the rear compartment lid lamp(s) from the rear compartment lid.




2. Install the flasher fuse (1) if required.
3. Connect the electrical connector to the flasher fuse (1).
4. Connect the electrical connectors to the rear compartment lid lamp(s).
5. Close the rear compartment.