99. Drive Shaft Oil Seal Assemble - Right Side

Drive Shaft Oil Seal Assemble - Right Side

Special Tools
* J-8092 - Driver Handle
* J-29130 - Axle Seal Installer

For equivalent regional tools, refer to Special Tools (Tools and Equipment).





Caution: Install the seal onto the tool before installing into the case to prevent damage to the seal.

Note: Inspect the axle oil seal assembly (4). Be sure that the seal was not damaged during assembly. Check that the garter spring was not dislodged.

Use J-29130 - seal installer and J-8092 - driver handle in order to install the axle oil seal assembly (4) on the case extension assembly.