2. Crankshaft Balancer Removal

Crankshaft Balancer Removal

Special Tools
* EN-46359 - Puller End Protector
* J-41816 - Crankshaft Balancer Remover

For equivalent regional tools, refer to Special Tools (Special Tools).




1. Remove the crankshaft balancer bolt and washer.





Caution: Do NOT use a power-assisted tool with the special tool in order to remove or install this component. You cannot properly control the alignment of this component using a power-assisted tool, and this can damage the component.

2. Remove the crankshaft balancer using the J-41816 - remover along with EN-46359 - protector.